True Forming Back

Overview

  TFB Overview

The Ergonomic Solution

The True Forming Back is designed for comfort, custom fit, and trouble-free adjustability. Our easily accessible hardware is available in both two and four point mounting options and is neatly hidden behind a Velcro flap to maintain a sleek and clean appearance.

What is the True Forming Back?

The True Forming Back (TFB) consists of a lightweight aluminum base, a double layered foam setting consisting of 1/2in. of SunMate® foam, and 1/2in. of High Resilience (HR3) foam. The True Forming Back can be mounted to any chair on the market, including the Quantum TB3 Power Seating with the TB3 Spine Mounting Hardware.

TFB Features:

  • Ergonomic
  • Memory Foam Comfort
  • On-demand Adjustable Support
  • Easy to Set Up
  • Foam-in-Place Solution Available
TRUE FORMING BACK WHITE PAPER BROCHURE [20Mb]STEALTH CUSTOM SEATING SOLUTIONS BROCHURE [0.58Mb]TFB ALL PURPOSE KNOB HARDWARE OWNERS MANUAL OWNER'S MANUAL [1.37Mb]TFB JL HARDWARE OWNER'S MANUAL [1.22Mb]TFB TROUBLE FREE MOUNTING HARDWARE OWNER'S MANUAL [0.9Mb]TFB ALL PURPOSE HARDWARE OWNER'S MANUAL [1.19Mb]TFB TROUBLE FREE HARDWARE OWNER'S MANUAL [3.01Mb]TRUE FORMING BACK OWNERS MANUAL OWNER'S MANUAL [1.84Mb]TFB J L HARDWARE MANUAL OWNER'S MANUAL [1.23Mb]TRUE FORMING BACK ORDER FORM [2.7Mb]TFB FLEX ORDER FORM [3.35Mb]TFB CONTOUR ORDER FORM [2.94Mb]
See Configurations
True Forming Back

True Forming Back Specifications & Configurations

: TFB Back Diagram.
  1. Backrest Width (A2 I-Back Middle Width)1
  2. Backrest Height
  3. Between Canes Mounting Hardware and Lateral Slots2
  4. Full Width Mounting Hardware and Lateral Slots2
  5. Stealth Positioning™ Harness Slots3
  6. Head Support Back Mount Threads
  7. Air Vent Holes4
  8. 105° Bent, (2in (5.08cm) width from side per side)
  9. Seat-to-Back Bracket Threads
  1. A2 - On I-Backs only, the width of the middle section is 2in (5.08cm) thinner per side than Back Total Width (A).
  2. Need to consider vertical adjustment is limited when both mounting hardware and laterals are present on same track slot.
  3. Stealth Positioning Harness slots are not present on 10in width backs.
  4. Air Vent hole pattern varies depending upon width and/or height.

True Forming Back Configuration

Width (A)101214161820
Height (B)
10in (25.40cm)
11in (27.94cm)
12in (30.48cm)
13in (33.02cm)
14in (35.56cm)
15in (38.10cm)
16in (40.64cm)
17in (43.18cm)
18in (45.72cm)
19in (48.26cm)
20in (50.80cm)
  1. Pad size varies depending on stitch folding, cover material and foam thickness/density
  2. Based on foam dimensions

IMPORTANT NOTEDimension tables do not display properly on small screens. Download True Forming Back Configuration table on your device below.

Download True Forming Back Configuration
XLSODSHTML
Download True Forming Back Configuration: XLSODSHTML
Downloaded file can only be opened and viewed on desktop version of Excel or OpenOffice, for the moment. Check How to open downloaded .XLS and .ODS files?
True Forming Back Documents
TRUE FORMING BACK WHITE PAPER BROCHURE [20Mb]STEALTH CUSTOM SEATING SOLUTIONS BROCHURE [0.58Mb]TFB ALL PURPOSE KNOB HARDWARE OWNERS MANUAL OWNER'S MANUAL [1.37Mb]TFB JL HARDWARE OWNER'S MANUAL [1.22Mb]TFB TROUBLE FREE MOUNTING HARDWARE OWNER'S MANUAL [0.9Mb]TFB HEAVY DUTY HARDWARE OWNER'S MANUAL [0.68Mb]TFB QUICK RELEASE HARDWARE OWNER'S MANUAL [0.91Mb]TFB ALL PURPOSE HARDWARE OWNER'S MANUAL [1.19Mb]TFBN-HRHW OWNER'S MANUAL [0.89Mb]TFB TROUBLE FREE HARDWARE OWNER'S MANUAL [3.01Mb]TRUE FORMING BACK OWNERS MANUAL OWNER'S MANUAL [1.84Mb]TFB J L HARDWARE MANUAL OWNER'S MANUAL [1.23Mb]TRUE FORMING BACK ORDER FORM [2.7Mb]TFB FLEX ORDER FORM [3.35Mb]TFB CONTOUR ORDER FORM [2.94Mb]

Mounting Compatibility

ModelBetween CanesFull WidthR BackI Back
Trouble Free
12in (30.48cm) width and above
J&L Brackets
12in (30.48cm) width and above
Adjustable Knob
12in (30.48cm) width and above
ADI Quick Release
TB3 MountComing Soon
 Incompatible   Compatible

IMPORTANT NOTEDimension tables do not display properly on small screens. Download Mounting Hardware Compatibility table on your device below.

Download Mounting Hardware Compatibility
XLSODSHTML
Download Mounting Hardware Compatibility: XLSODSHTML
Downloaded file can only be opened and viewed on desktop version of Excel or OpenOffice, for the moment. Check How to open downloaded .XLS and .ODS files?

Laterals Hardware Compatibility

ModelBetween CanesFull WidthR BackI Back
Thin Laterals (TWBTL
Thin Laterals with Link (TWBSTL)
12in (30.48cm) width and above
12in (30.48cm) width and above
Link Style (TWBL)
12in (30.48cm) width and above
12in (30.48cm) width and above
Link Style Pediatric (TWBNL)
Modular Swing Away (LT520)
12in (30.48cm) width and above
12in (30.48cm) width and above
Modular SA Pediatric (LTN520)
 Incompatible  Compatible

IMPORTANT NOTEDimension tables do not display properly on small screens. Download Lateral Hardware Compatibility table on your device below.

Download Lateral Hardware Compatibility
XLSODSHTML
Download Lateral Hardware Compatibility: XLSODSHTML
Downloaded file can only be opened and viewed on desktop version of Excel or OpenOffice, for the moment. Check How to open downloaded .XLS and .ODS files?
Rectangular Back

R-Back Options

TFB R-Back

: TFB R-Back Reference Diagram
R-Back Shell Features
  1. Back Width
  2. Back Height
  3. Between Canes Mounting Hardware and Lateral Slots1
  4. Full Width Mounting Hardware
  5. Stealth Positioning™ Harness Slots2
  6. Head Support Back Mount Threads
  7. Air Vent Holes3
  8. 105° Bent, (2in (5.08cm) width from side per side)
  9. Seat-to-Back Bracket Threads
  1. Need to consider vertical adjustment is limited when both mounting hardware and laterals are present on same track slot.
  2. Stealth Positioning Harness slots are not present on 10in width backs.
  3. Air Vent hole pattern varies depending upon width and/or height.
Lateral Support Note
  1. Wings and lateral hardware mounted on outside slot (C) will have less travel with between cane mounting.
  2. Full width mount set ups depending on lateral support horizontal position may limit positioning possibilities.
  3. For lateral and wing compatibility refer to hardware comparison
  4. More information about wing specifications click here.
Some Available Options

TFBMD1417RC

TFBMD1417RC|TFBMD1417RM|TFBMD1417RN|TFBMD1417RF: True Forming R-Back Modification 14in x 17in with Coolcore Cover

True Forming R-Back Modification 14in x 17in with Coolcore Cover

TFBMD1417RM

TFBMD1417RC|TFBMD1417RM|TFBMD1417RN|TFBMD1417RF: True Forming R-Back Modification 14in x 17in with Air-Mesh Cover

True Forming R-Back Modification 14in x 17in with Air-Mesh Cover

TFBMD1417RN

TFBMD1417RC|TFBMD1417RM|TFBMD1417RN|TFBMD1417RF: True Forming R-Back Modification 14in x 17in with Neoprene Cover

True Forming R-Back Modification 14in x 17in with Neoprene Cover

TFBMD1417RF

TFBMD1417RC|TFBMD1417RM|TFBMD1417RN|TFBMD1417RF: True Forming R-Back Modification 14in x 17in with FIPS and Neoprene Cover

True Forming R-Back Modification 14in x 17in with FIPS and Neoprene Cover

See Full Options

R-Back Full Catalog

R-Back Wings

R-Back Wing Specifications

Wing Items

  • Upper Right Wing
  • Lower Right Wing
  • Upper Left Wing
  • Lower Left Wing
  • Wing Hardware
  • Upper Inner Pad Frame
  • Upper Outer Pad Frame
  • Upper Inner Pad Frame
  • Lower Outer Pad Frame

Wing Hardware

  • Mounting T-Nut: Vertical travel 1 1/2in (3.81cm)
  • 180° Adjustment Point
  • Adjustment Point Locking Screw
  • Mounting Depth Adjustment 5 1/2in (13.97cm)
  • Pad Frame Screws/Washers (1/4-20 X 3/8 BHS)
  • Outer Mounting Hinge Slots 1 1/2in (3.81cm)
Pad Frame Specifications
 Inner Pad FrameOuter Pad Frame
SizeDepthHeightDepthHeight
XS
2in (5.08cm)
4 1/4in (10.80cm)
3in (7.62cm)
3 3/16in (8.10cm)
S
4in (10.16cm)
4 3/4in (12.07cm)
4in (10.16cm)
4 1/2in (11.43cm)
M
4in (10.16cm)
5 1/4in (13.34cm)
4in (10.16cm)
5in (12.70cm)
L
4in (10.16cm)
5 3/4in (14.61cm)
4in (10.16cm)
5 1/2in (13.97cm)
XL
4in (10.16cm)
6 1/4in (15.88cm)
4in (10.16cm)
6in (15.24cm)
Pad Dimensions
 Pad Size 1,2Front Height 1,2
SizeDepthMax. HeightBackFront
XS
6 7/8in (17.48cm)
5 11/16in (14.43cm)
5 11/16in (14.43cm)
4 19/32in (11.66cm)
S
9 1/2in (24.13cm)
5 13/16in (14.73cm)
5 13/16in (14.73cm)
5 3/8in (13.61cm)
M
9 1/2in (24.13cm)
6 5/16in (16.00cm)
6 5/16in (16.00cm)
5 7/8in (14.88cm)
L
9 1/2in (24.13cm)
6 13/16in (17.27cm)
6 13/16in (17.27cm)
6 3/8in (16.15cm)
XL
9 1/2in (24.13cm)
7 17/32in (19.15cm)
7 17/32in (19.15cm)
7 1/8in (18.06cm)
  1. Pad size varies depending on stitch folding, cover material and foam thickness/density
  2. Based on foam dimensions
Wing Matrix
Back Shell Width Compatibility
Size101214161820
XSCompatibleCompatibleNot SuggestedNot SuggestedNot SuggestedNot Suggested
SIncompatibleCompatibleCompatibleNot SuggestedNot SuggestedNot Suggested
MIncompatibleIncompatibleCompatibleCompatibleCompatibleNot Suggested
LIncompatibleIncompatibleIncompatibleCompatibleCompatibleCompatible
XLIncompatibleIncompatibleIncompatibleCompatibleCompatibleCompatible
 Incompatible Compatible Not Suggested
I Shaped Back

I-Back Options

TFB I-Back

: TFB I-Back Reference Diagram
I-Back Shell Features
  1. Back Total Width (A2 I-Back Middle Width)1
  2. Back Total Height
  3. Between Canes Mounting Hardware
  4. Full Width Mounting Hardware and Lateral Slots2
  5. Stealth Positioning™ Harness Slots3
  6. Head Support Back Mount Threads
  7. Weight Release Holes4
  8. 105° Bent, (2in (5.08cm) width from side per side)
  9. Seat-to-Back Bracket Threads
  1. A2 - On I-Backs only, the width of the middle section is 2in (5.08cm) thinner per side than Back Total Width (A).
  2. Need to consider vertical adjustment is limited when both mounting hardware and laterals are present on same track slot.
  3. Stealth Positioning Harness slots are not present on 10in width backs.
  4. Hole release holes patter varies depending on width or height.
Lateral Support Note
  1. Wings are not compatible or is not suggested for i-Back options, since it beats the purpose of the i-Back in the first place.
  2. TWB Lateral Style hardware as well as Thin Laterals with an extra link are not suggeted either, same as with the i-Back, lateral offset is acquired by the i-Back Structure.
  3. If you required the use of any of the hardware mentioned above, please contact your local Stealth's representative or call one of our friendly CSRs
  4. For lateral compatibility refer to hardware comparison

TFBMD1417IC

TFBMD1417IC|TFBMD1417IM|TFBMD1417IN|TFBMD1417IF: True Forming I-Back Modification 14in x 17in with Coolcore Cover

True Forming I-Back Modification 14in x 17in with Coolcore Cover

TFBMD1417IM

TFBMD1417IC|TFBMD1417IM|TFBMD1417IN|TFBMD1417IF: True Forming I-Back Modification 14in x 17in with Air-Mesh Cover

True Forming I-Back Modification 14in x 17in with Air-Mesh Cover

TFBMD1417IN

TFBMD1417IC|TFBMD1417IM|TFBMD1417IN|TFBMD1417IF: True Forming I-Back Modification 14in x 17in with Neoprene Cover

True Forming I-Back Modification 14in x 17in with Neoprene Cover

TFBMD1417IF

TFBMD1417IC|TFBMD1417IM|TFBMD1417IN|TFBMD1417IF: True Forming I-Back Modification 14in x 17in with FIPS and Neoprene Cover

True Forming I-Back Modification 14in x 17in with FIPS and Neoprene Cover

See Full Options

I-Back Catalog

Structure & Customizations

Cushion, Structure and Customizations

: Aluminum Base Cushion
Basic Configuration

Packages come with 1/2in. (2.54cm) HR3 foam, 1/2in. Closed Cell foam, and 1/8in. (3.17mm) aluminum base.

: Standard Comfort.
Standarized Comfort

Our True Forming Back comes standard with 1/2in. (2.54cm) medium grade SunMate foam, a highly advanced memory foam originally designed for space exploration.

: Advanced Customizations
Custom Configuration

There are advanced customizations available such as bi-angular back, lumbar support and custom monogramming. For customizations that are not available on the order form please call your local Stealth Representative or one of our Customer Support Representatives.

Bi-Angular Modification

The Bi-Angular back main purpose is to promote a better and more personalized PSIS support. Support that can be tailor on-demand. Even though you can also use an cushion insert for this, the bi-angular modification is the better solution for progressive customization. Some of its features are:

  • Two sections hinged together for angle adjustment.
  • Helps to facilitate natural spinal curvatures, improving overall alignment.
  • The bi-angular back may be instrumental in control of posterior pelvic tilt and head control.
  • R-Back and I-Back configurations available.

Important Note The Bi-Angular back modification is not compatible with ADI Quick Release or 2 point mounting hardware. If 2 point mounting is required contact your CSR or Stealth's Authorized Local Representative.

Foam Modifications

As with many other solutions the TFB has many foam options that allows you to customize the comfort for the actual cushion user. If no customization is noted during ordering, the TFB will come with 1/2in (12.70mm) HR3 as the base foam and 1/2in (12.70mm) Medium SunMate® as the contact foam. You can select combinations of Closed Cell, HR3 and (Soft/Medium/Firm) SunMate foams depending in the level of density the user requires.

We also offer the following foam modifications for a more advanced customization:

  • Curved By Foam
  • PSIS Lumbar Support Insert
  • Foam-In-Place Seating

Click here for more information.

Mounting Hardware

Mounting Hardware

Adjustable Knob Hardware
Adjustable Knob

Better known as the All Purpose Hardware, it is a strong and reliable hardware that fits most cane diameters. The Knob Hardware also comes with a WC20 transport kit option.

Trouble Free Hardware
Trouble Free

The Trouble Free hardware is affordable and strong. Easy snap-on mounting hardware is made of black anodized aluminum. ABS plastic sleeves allow for a better snap and flexibility without damaging the chairs frame. The Trouble Free hardware makes it easy to transfer the seating system from one mobility base to another while maintaining the custom fit needed.

J&L Hardware
J&L (J Hooks & L Brackets)

This hardware is designed to be effective, lightweight and affordable. J&L hardware is produced from durable, anodized aluminum or high grade steel.

ADI Quick Release Hardware
ADI Quick Release

Removable mounting width adjustable positioning (angle, depth and width). Clamps to multiple diameter tubing. No Spacers Required! As with the knob hardware, is WC20 crash tested approved with special transport option pin.

Between Cane Options

2 Point
PN#PRODUCT NAMEUSD
TFBMDMAKB2TFB Series 2 point Adjustable Knob Hardware for Between Cane Mounting$375.00
TFBMDMJLB2TFB Series 2 point J&L Hardware for Between Cane Mounting$325.00
TFBMDMTFB2TFB Series 2 point TF Hardware for Between Cane Mounting$325.00
MSRP prices and exchange rates are subject to change. Exchange Rate may vary and cannot be considered definite value as this service is provided by an external source.
4 Point
PN#PRODUCT NAMEUSD
TFBMDMAKB4TFB Series 4 point Adjustable Knob Hardware for Between Cane Mounting$465.00
TFBMDMJLB4TFB Series 4 point J&L Hardware for Between Cane Mounting$325.00
TFBMDMTFB4TFB Series 4 point TF Hardware for Between Cane Mounting$345.00
MSRP prices and exchange rates are subject to change. Exchange Rate may vary and cannot be considered definite value as this service is provided by an external source.

Full Width Mounting Options

2 Point
PN#PRODUCT NAMEUSD
TFBMDMAKF2TFB Series 2 point Adjustable Knob Hardware for Full-Width Mounting$375.00
TFBMDMJLF2TFB Series 2 point J&L Hardware for Full-Width Mounting$325.00
TFBMDMQRF2TFB Series 2 point ADI Quick Release Hardware for Full-Width Mounting$295.00
TFBMDMTFF2TFB Series 2 point Trouble Free Release Hardware for Full-Width Mounting$325.00
MSRP prices and exchange rates are subject to change. Exchange Rate may vary and cannot be considered definite value as this service is provided by an external source.
4 Point
PN#PRODUCT NAMEUSD
TFBMDMAKF4TFB Series 4 point Adjustable Knob Hardware for Full-Width Mounting$465.00
TFBMDMJLF4TFB Series 4 point J&L Hardware for Full-Width Mounting$325.00
TFBMDMTFF4TFB Series 4 point Trouble Free Release Hardware for Full-Width Mounting$345.00
MSRP prices and exchange rates are subject to change. Exchange Rate may vary and cannot be considered definite value as this service is provided by an external source.
Compatibility Table
ModelBetween CanesFull WidthR BackI Back
Trouble Free
12in (30.48cm) width and above
J&L Brackets
12in (30.48cm) width and above
Adjustable Knob
12in (30.48cm) width and above
ADI Quick Release
TB3 MountComing Soon
 Incompatible   Compatible

 

Coolcore®

Coolcore Technology

Coolcore Logo

What is Coolcore®?

  • Year Round Temperature Control
  • Chemical Free
  • 4-Way Stretch
  • Patented Technology
  • Better Cooling Ability
  • Durable - Last Longer
  • Protects from Sun's Harmful Rays (UPF)

While the other makers of cooling fabrics use a number of chemicals to enhance wicking, transportation and evaporation, Coolcore fabrics are chemical free. To make that possible, we changed the essence of cooling fabric technology right down to its very core.

from Coolcore Website

Coolcore Temperature Management

Year-Round Regulation

A great base layer in summer is a great base layer in winter.

Stealth's Cushions Thermoregulation line is not a new technology, but a new application. The Coolcore Technology starts with cooling but the patented yarn technology makes for a better textile that provides year‑round temperature regulation.

Coolcore Seasonal Cooling Management Diagram

About Coolcore

Coolcore is a research proven performance fabric technology that adapts to its environment and regulates temperature by managing heat and moisture. The proprietary construction helps manage and distribute moisture quickly throughout the fabric to enhance the evaporation and drying time.

Chemical Free Fabric Technology

Normally other brand fabrics use topical chemicals that not only can be harmful to your skin, but after only a few washes, the cooling properties of the product are no longer effective. The Coolcore cooling technology is built into the fabric fibers, preventing any decline in the performance and keeping it's cooling properties. Coolcore patented technology allows for a controlled evaporative process that keeps you cool, dry and comfortable in any condition.

Fabric Benefits

Research driven, patented fabrics from Coolcore are chemical-free and yield remarkable benefits. They cool better, last much longer and offer protection from the suns harmful rays (UPF)

FIPS Custom Mold

Foam-in-Place Seating Solution

The Foam-in-Place Seating (FIPS)

Foam in Place packages include a cover for Foam in Place and one unit FIPS Solution. FIPS SunMate liquid foam technology allows for a custom mold of the client to be created on the spot. This molded foam option provides postural accommodation and contributes to reduced pressure by supporting a larger surface area.

Click on video to see how it works
True Forming Back Packages with FIPS

TFBMD1416RF

TFBMD1416RF|TFBMD1416IF: True Forming R-Back Modification 14in x 16in with FIPS and Neoprene Cover

TFBMD1416IF

TFBMD1416RF|TFBMD1416IF: True Forming I-Back Modification 14in x 16in with FIPS and Neoprene Cover

Important Note FIPS comes with an special designed cover made of Neoprene. Any other option is considered as an advanced configuration.

SEE ALL OPTIONS BELOW

True Forming Back Packages with FIPS

Other Options

Other Foam Configuration Options

TFBMDOL10: Internal Half Round Lumbar Roll for Back

(TFBMDOL10) PSIS Lumbar Support Insert

ADI lumbar support is a simple insert that comes with hook & loop strips to keep it in its place.

(TFBMDOF12) Curved By Foam

Additional contoured lateral support for your back provided by sturdy Etha Foam wedges glued to the back cushion.

Additional Foam Options

 

Call Today

  Call to Place Your Order Today

home page | about us | careers | events | CEU program | reviews | find representative | contact us | resources
Stealth Products, LLC ©2021 | +1 (800) 965-9229 | +1 (512) 715-9995