The Twister Switch
- Single input mechanical button switch.
- Three styles of availability.
- Light activation force.
- Can be activated at any point on the switch.
- Tactile and auditory feedback.
Egg Style Mechanical Switches
Sensitivity | Can be activated anywhere on the surface and requires only light pressure. |
Adaptability | Integral threaded inserts in the base for secure mounting and positioning. |
Available Colors | Red (ESRED), Green (ESGRN), Blue (ESBLU), Yellow (ESYEL), or Black (ESBLK). |
Dimensions | 1 11/16in (4.25cm) x 2 3/4in (6.99cm) x 3/4in (19.05mm) (Wide x Long x Tall) |
Input | 1/8in (3.18mm) Right angle mono headphone jack |
Cord Length | 56 in (1.4 m) |
Note | Low voltage and amperage use only |
IMPORTANT NOTEDimension tables do not display properly on small screens. Download Egg Switch Specs table on your device below.
Micro-Lite Button
Sensitivity | 4oz (10cm) activation force. |
Adaptability | Threaded inserts on bottom for mounting and positioning. |
Available Colors | Blue, Green, Red, Silver, Yellow and a Black dense closed cell foam. |
Dimensions | 1 3/4in (4.45cm) x 2 3/4in (6.99cm) x 5/8in (15.88mm) (Long x Wide x Deep) |
Input | 1/8in (3.18mm) Right angle mono headphone jack |
Cord Length | 56 in (1.4 m) |
Note | Low voltage and amperage use only |
IMPORTANT NOTEDimension tables do not display properly on small screens. Download Micro-Lite Switch Specs table on your device below.
Mini-Cup Button
Sensitivity | Light activation force |
Adaptability | Smooth bottom for adhering to mounting surfaces or installing in pads. |
Available Colors | Black with blue, green, orange, red and yellow stick-on dots. |
Dimensions | 7/8in (22.23mm) x 3 3/4in (9.53cm) (Diameter x Tall) |
Input | 1/8in (3.18mm) Right angle headphone jack |
Cord Length | 70 in (1.78 m) |
Note | Low voltage and amperage use only |
IMPORTANT NOTEDimension tables do not display properly on small screens. Download Mini Cup Switch Specs table on your device below.
NOTEFunctions as access switching for mode or selection use on a drive control, emulating alternative mouse buttons, for augmentative communication devices, for accessing environmental control systems, interacting with simple toys, or controlling any other device that can be navigated with one or more switches. Its small size allows mounting inside a facial pad or discrete use affixed in position with double stick tape or adhesive. Activation occurs anywhere on the target area.
Sip & Puff Pneumatic Switch
Sip & Puff switches are designed for users with limited or no motor control. Used for wheelchair navigation, augmentative communication, computers, or any device that will function with this type of switch input. Manipulating a standard switch for people with motor disabilities can be difficult, tiring, or impossible. A correctly set up pneumatic switch can activate and control devices through a simple inhale and/or exhale into a mouth tube connected to the i‑Drive pneumatic switch interface to turn sips and puffs into electrical signals.
The i‑Drive is the most advanced wheelchair drive control to date! Designed around a proprietary CPU (Central Processing Unit) and unique software, this combination of hardware and software supports four powered switches and four mechanical switches. See more information about the i‑Drive.
Wobble Switch
Part Number | |
Switch Type | Mechanical |
Output Type | Normally Open |
Activation Type | Lever |
Activation Force | 132g (0.29lbs) |
Activation Surface | 10.1cm (3.98in) |
Distance to Activate | 38mm (1.50in) |
Feedback | Auditory, Tactile |
Cord Length | 36in (91.44cm) |
Plug Type | 1 1/8in (2.86cm) |
IMPORTANT NOTEDimension tables do not display properly on small screens. Download Wobble Switch Dimensions Table table on your device below.
mo-Vis Twister
Activation Force | .067lbf (.29N) |
Compatibility | Twister on Bent Tube and Twister Basic are compatible with each mo-Vis joystick |
Available Colors | Red, Green, Blue, Yellow, and Black |
Surface Diameter | 21/32in (17.02mm) |
Input | 3.50mm mono jack plug |
Cord Length | 1500mm (4ft 8in) |
Note | Available as Twister Basic and Twister on Bent Tube |
IMPORTANT NOTEDimension tables do not display properly on small screens. Download Twister Specs table on your device below.
Flat Surfaces Mount
The Twister Dome comes complete with the Twister switch mounted onto a plastic dome base that allows you to mount the Twister Switch on any flat surface easily.
Twister Dome Features
Find Other Mounting Solutions
Power Chin BoomThe Power Chin Boom is a versatile and innovative motorized mounting arm. It's designed for mounting a chin joystick.
Gatlin Series MountsThe Gatlin Series is a robust mid-line positioning system for trays, switches, driver inputs and displays. With multiple adjustment points and both horizontal and vertical mounts
Proportional DriveStealth offers proportional alternative drives that are easy to install, setup and position. Also ergonomic and appealing designs.
mo-Vis All Round
The All-Round Joystick is a compact version of a standard electronic wheelchair joystick. It requires the most force of all the mo-Vis Joysticks, with a requirement of .55lbf (2.44N). Click for more information
Expanding Solutions with i-Connect
Extend possibilities by adding functionalities that do more than just drive with the touch of a switch. Activate a tilt, raise or lower a bed, and numerous other mechanical functions with the i‑Connect.
The i‑Connect provides power to sensors independent of devices by adding ports to a power or manual chair. The i?Connect is the smartest solution for endless possibilities.
Power your proximity sensors and fiber optics by allowing them to function as buttons with little or no effort to activate. The i‑Connect offers a Sip & Puff version that is compatible with the i-Drive Bluetooth Interface or previous configurations as well.